Complete concept, text, descriptions and photos copyright 2009-2022  by  LH Davis. All rights  reserved and enforced!

"THE TRUTH AMPLIFIER"
Professional Quality  HDTV /  CATV 
Antenna Signal Booster Amplifier
LINEAR VHF - UHF

ATTENTION! PLEASE READ ENTIRE DESCRIPTION CAREFULLY ...
So that you know EXACTLY what you are buying with our offering!

ALSO PLEASE NOTE THAT WE OFFER TWO VERSIONS OF THE TRUTH AMP ...
THIS LISTING IS FOR THE MAST MOUNT AMP WITH SEPARATE DC POWER INJECTOR.

WE ALSO OFFER A VERSION FOR USE COMPLETELY INSIDE THE HOUSE  ...
PLEASE SEE OUR OTHER LISTINGS FOR THE ALTERNATE VERSION. 

We now offer the mast mount version here exclusively as it is no longer offered on eBay. We withdrew the listing from eBay since eBay was pushing the listing WITHOUT full descriptive details to unqualified buyers who had no idea what a "mast mount" amplifier entailed. This resulted in numerous returns of perfectly good amplifiers (sometimes damaged by the buyers before returning them) AT OUR EXPENSE! Obviously, no seller can stand this kind of imposition!

Before ordering this version, be sure you understand why a mast mount amplifier might be preferable over an inside amplifier in SOME instances, such as deep fringe locations combined with cable runs over 75 to 100 feet. Otherwise the indoor version should suffice.

A mast mount amplifier requires some minimal technical knowledge and skill as well as being able to access the top of the antenna mast near the antenna itself. Make sure you are qualified and able to do this kind of work, or can obtain help from someone who is, before you purchase.


This version can be purchased securely through PAYPAL with the BUY NOW button at the end of the listing. You may use your credit card securely whether you are PayPal member or not. You do NOT have to have a PayPal account to purchse through PayPal with our BUY NOW button at end of listing!






We began offering the HAND MADE, TRUTH amplifier on eBay in 2009 just after the  broadcast TV digital transition. Since then, while the internal circuitry has remained essentially the same, the housings have taken  many forms mainly depending on whatever type cases we could find available on the surplus market.

The most recent, prior version offered, from about mid 2012 through 2013 was built into a surplus, thin  metal, container that many of our customers often commented looked much like a common "mint tin".

METAL HOUSING STYLE OF 
PRIOR VERSION


At the end of 2013, our supply of several hundred of these small, hinged, tin containers began to run  out and we forced to search for some other suitable housing that would be readily available at a  reasonable price so as to no longer have to constantly change styles or raise prices for more  expensive enclosures.

During our search across the Internet, while we found suitable, affordable cases to be almost  non-existent, we noticed that a lot of hobby builders were actually using the true mint tin cases for their project containers. So, we thought ... WHY NOT? We had been using "similar to mint tin" type cases  with great success so why not go all the way and commit our future housings to the REAL THING!  They do, inherently, make ideal RF-tight enclosures. Furthermore, this is also  RECYCLING in its truest form, something we strongly believe in!

We found that there were quite a few offerings of empty mint tin containers on eBay for just such use  for electronic project circuit enclosures  by ham radio and audio amateur enthusiasts. So, we decided  to just go ahead and standardize on the traditional "Altoids" tins to house the TRUTH circuitry. This  way we would ALWAYS have access to the empty tins either from eBay or, in a pinch, we could   simply go buy the mints locally and empty the tins (although I must confess we do not personally enjoy  the Altoids mints!).

So, now, as of 2014 ... ... ... 


This is the current styling of the TRUTH amplifier.
We utilize the standard Altoids mint tins by mounting our external components to the rear side of the  case.
The cases are, first, cleaned and the rear printed surface sanded and buffed clear.
Then the connector, LED and power jack mounting holes are punched and the amplifier hand  assembled inside the case.
NOTE! AS OF 2016 THE MINT TIN CASES ARE NOT   SANDED! ORIGINAL COATING IS LEFT INTACT TO HELP DETER OXIDATION AND CORROSION. LABELING IS APPLIED ON TOP OF COATING.



Now, with our latest housing style, you can have the superior performing TRUTH digital signal amplifier  and a novel conversation piece at the same time! Sorry, no choice of "flavors" ... we use what we can  get! (By the way, if you happen to have any of these type empty mint tins for sale let us know)!




And so, we now offer this latest evolution of the TRUTH amplifier styling ...
... with the original description of its concept and performance herewith below!


NOTE! AS OF 2016 THE MINT TIN CASES ARE NOT   SANDED!
ORIGINAL COATING IS LEFT INTACT TO HELP DETER OXIDATION AND CORROSION.
LABELING IS APPLIED ON TOP OF COATING.



Thank you for  reading and considering the TRUTH!





ORIGINAL 2009 PREFACE -


Most everyone has, by now, experienced "High Definition" television in some form or other.  But,  what many people STILL do not seem  to realize, is the fact that broadcast television, so-called "OTA" (for "over the air") has the greatest  potential  for ULTIMATE "High  Definition". All of the digital "HD" transmissions are NOT equal and "OTA" broadcasts, assuming  faithful  signal maintenance by the  transmitting station, noticeably exceeds the inherent limitations and capabilities of both satellite and cable!

I believe that  broadcasters are, by and  large, missing the boat by not emphasizing this fact in constant on-air promotion. This kind of informative promotion is not happening, at least in my locality. When the digital transition  occurred, they told you a lot about the cheap,  government sponsored "converter" boxes, and coupons for them, but they should have been  mentioning  antenna quality and  discussing the excellent inherent quality of the new ALL-DIGITAL TV receivers. I suppose they are  afraid of  offending their cable carrier affiliates.

Anyway, the point here is, if you have not seen high  definition  programming  received over the air on a quality, all-digital TV from a quality network and affiliate station, then you  have not  yet experienced  true HDTV (your local PBS HD channel should be a very good example of the current  state-of-the-art)!

This fact, along with the new and varied programming that is, and will be increasingly, offered by TV  stations  on their multiple  sub channels, is why antenna based reception systems are, and will continue to be, making a huge  comeback in the months and years ahead!  Once again it will be "fashionable" to sport a TV antenna on your roof! 

This listing is about a high quality digital signal amplifier that will help you get the most from your  antenna  with  fringe reception  of all the new, highest quality programming that is, and will be, available to you ... FREE ... "OVER  THE  AIR"!







* NOTE *
THIS LISTING IS FOR ONE OF TWO DIFFERENT VERSIONS OF THE TRUTH AMP
PLEASE NOTE THE DISTINCTIONS DESCRIBED HERE-




Since it has become more difficult to find suitable surplus ready made enclosures at a reasonable  price, as of 2014 we have decided to build the TRUTH amp entirely "from scratch" exclusively using  our  own prepped, actual mint tin, metal cases. These totally hand made versions may not be all that  "pretty" to look at in their physical form but we assure you the results they produce on your HDTV will  be!


Again we point out that we now offer the TRUTH amplifier in two versions ... 

THIS LISTING is for the MAST MOUNT PACKAGE which includes the amplifier for attaching directly to the antenna mast up near near the antenna itself. It also includes a DC power injector with DC power supply for location inside the house. The DC Injector feeds the power supply voltage up the coax to the amplifer mounted at the antenna.

PLEASE NOTE THAT THIS VERSION IS OFFERED FOR THE DO-IT-YOURSELFER WITH SOME MINIMALLY REQUIRED KNOWLEDGE AND SKILL.

A mast mount may be preferable for installations with coax runs of over 75 feet, otherwise the indoor unit should suffice.
As of  late 2015, the mast mount amplifier mint tin housing is no longer sanded since the manufacturer's print coating offers some rust protection for outdoor mounting.

If you would prefer the INSIDE version, which includes a  matched, AC/DC wall plug  power adapter, PLEASE SEE OUR OTHER LISTING  for that version!


PLEASE read this listing CAREFULLY before purchasing so you know EXACTLY what we are offering!





(NOTE: Although we normally consider these in the borderline "gimmick" antenna  category, we have  recently learned from several buyer feedback emails that the TRUTH amp can work well, in some  situations,  to improve the "Clear TV" antenna sold on TV and the new "leaf" design also.)


THANK YOU VERY MUCH FOR READING AND CONSIDERING "THE TRUTH"!







This is exactly what you will receive when you purchase from this listing.
Note this version comes with a DC power injector and plug-in power supply.
For best performance in FRINGE signal areas, it is always best to locate the amplifer at the antenna.
NOTE! AS OF 2016 THE MINT TIN CASES ARE NOT   SANDED!
ORIGINAL COATING IS LEFT INTACT TO HELP DETER OXIDATION AND CORROSION.
LABELING IS APPLIED ON TOP OF COATING.



We now offer this complete package for the do-it-yourselfer who would like to mount the amplifier at the antenna.
Our included, multi-page, printed applications tips offers advice on how to do this.
The amplifier receives its DC power from the included power injector located inside the house.

Please note that as of  late 2015, the mast mount amplifier mint tin housing is no longer sanded
since the manufacturer's print coating offers some rust protection for outdoor mounting.






TESTIMONIALS  

We continue to receive some nice feedback from eBay buyers ...
So, I thought it might be beneficial to bring just a few of their comments up front here in the  description ... 
so that you can see at a glance what some other eBay buyers have to say about our TRUTH amplifier!





You can buy a lot of so-called "HDTV booster amplifiers", mass-produced in China, Taiwan, or Mexico  from  about  $7.00 to $48.00  depending on the particular unit and the source. You are probably looking at a list of some of these  now if  you did  an eBay  search to get here. Or, alternately, you can spend just a bit more and buy our new, HAND-MADE (in  the  USA), individually tested, ultimate  quality,  "TRUTH" amplifier from this single, exclusive source, which  INCLUDES shipping  and handling, and have yourself a TRUE signal amplifier that REALLY works for you ...
a TRUE  lifetime,  quality performer. 

The "TRUTH" amplifier was named for the faithful way it performs in maintaining full signal integrity.  Unlike  many  on the  market, this amplifier is specifically designed, fabricated and tested to be the ultimate low noise,  broadband,  linear, OTA  broadcast television signal amplifier performer available today, period! Utilizing a single, state-of-the- art low  noise  transistor with  minimal, low noise support components, uniquely applied in a special circuit configuration with an  esoteric,  surface mount,  stripline groundplane layout technique, powered by a non-typical internal power supply  decoupler/conditioner ...  TRULY,  recognizable superior performance is the result !

Now, with a remarkable, guaranteed maximum noise figure of 1.4 dB, a predictable, stable gain of 18  dB  over a  flat, linear response curve of within 1 dB from 50 MHZ to 1.2 GHZ, this amplifier will do the job for you  IF ANY WILL !







As described previously ... we have now standardized on the mint tin   case  enclosures shown here.
All functions are conveniently located.

NOTE! AS OF 2016 THE MINT TIN CASES ARE NOT   SANDED! ORIGINAL COATING IS LEFT INTACT TO HELP DETER OXIDATION AND CORROSION. LABELING IS APPLIED ON TOP OF COATING.





The TRUTH amplifier is only available from THIS SOURCE ...
If you see one sold elsewhere  ...IT IS COUNTERFEIT...
and we, and eBay, would appreciate  knowing about it!

Each amplifier is carefully handcrafted from beginning to completion
by the original designer, retired broadcast engineer and experimenter, O.T. Hudson.

There is NO mass production involved.
Each unit is individually hand assembled with circuitry  expertly  silver  soldered ... 
with meticulous attention to detail at every step of the process.

Then, each amplifier is carefully individually tested, TWICE, for performance  ....
first on the RF test bench and then in a "real world" receiving setup
prior to being certified for  shipment.
You won't find many other items manufactured this way nowadays!

O.T. can only build and sell a few  of these per month in this manner ...
So, obviously, his motive is not to "get rich" ...
(although he does remind you that any proceeds go  to  his favorite charity ... HIM!)
but, instead, he is truly motivated by his desire to share his niche creation
with as many as  possible  who will benefit by its application.


If you have tried some of the other "cheapos" in the past and have been less than satisfied with the  results, then this may finally be the device you have been looking for to really bring in those weak  signals that you have been missing! BUT ... keep in mind, that  NO RF amplifier can "boost" a signal that isn't there to begin with.
So, please  make sure you have optimized your antenna  system, feedline and connections before ordering and applying our "TRUTH" amplifier.
 

Assuming you have an  antenna that develops at least some usable signal current above the inherent signal to noise  margin limitations of your location, then this  amplifier will deliver it with strength and fidelity to your TV tuner or receiver. Digital signals  that were once  sporadic will typically lock strongly and some of those previously, completely undetected may now be  viewable, with consistency, with  the "TRUTH" amplifier in the line.


The designer developed this unit to complement his own homebrew antenna design (a description of  which  may  be seen  in our other eBay listings) for FRINGE reception under less than ideal conditions. This combination  has  performed  remarkably,  consistently pulling in digital broadcast transmissions from stations in markets as far as 70 miles away and even regularly picks up one station from a little over 90 miles distant! Furthermore, believe it or  not, the  rooftop  antenna  location for this reception performance is "down in a hole" (very low-lying creekbed far below average  terrain  surrounded by  wooded, granite embedded, hillsides)!

It was developed out of personal frustration after he had tried many other antenna/amplifier  combinations out  there  on the  market, yes the well known, heavily endorsed brand names as well, with unsatisfactory results. So, we  know  from  this  extensive, past experience that this amplifier will deliver the precision, low-noise, signal level  needed  for  digital lock  when a lot of others won't! This is why we can truthfully tell you that "if this amplifier won't work for you,  then  NO  other  will"!

We  have compared it side by side with most every type out there including some of the MOST expensive,  heavy  duty,  well- known,  industry standard commercial CATV units used by cable TV companies. Our "TRUTH" amplifier,  typically, exceeded  many of these in performance with weak signal input (probably due to our unit's superior noise figure  and  highly  stable, low  distortion,  reliable broadband gain). In fact, it was the frustration after buying the expensive, brand name CATV  amplifier,  that  led to the  development of the simple, "TRUTH" amplifier. It worked where the others we tried would not ... and  that IS  the  simple  TRUTH!

Keep in mind, you ALWAYS need a GOOD antenna and the best location for it possible. But, when  you  REALLY need  an amplifier  to make the final difference with a signal being captured or not, then you REALLY do, TRUTHFULLY,  need  our  "TRUTH"  amplifier!

Also be aware that you may NOT need a preamplifier if ...
you live within thirty miles of the transmitters you wish to receive so long as you have the proper  antenna  mounted  in the  proper location. In these cases, an amplifier could possibly make things worse by over-driving a  sensitive  receiver!  Exceptions  to this would be if you have to run more than 50' of coax from your antenna to your receiver or if you  need  to split  your signal  to two or more sets. Then you may need an amplifier, preferably close to the antenna itself, to make up  for  the  signal loss in a  very long cable run or splitter loss.

However, there is one school of thought that a GOOD, LOW NOISE peamplifier will improve ALL  antenna- receiver  situations as  long as the preamplifier has a noise figure below 3 dB since most commercial receivers have a 3 dB,  or  higher,  noise figure in  the first RF stage!

And, if you are like many of us located 50 to 70 or more miles away from transmitters, then you  definitely  need a  good,  properly mounted antenna AND a good amplifier to enjoy consistent, dependable day and night digital  broadcast  reception. If you would like to see information on obtaining our complement DIY, "TruTenna" TRUTH antenna  design  info ...

Please see The "TruTenna" TRUTH Antenna


A signal amplifier is just ONE component in a signal chain which is always only as good as its weakest link. 

Furthermore, EVERY location and EVERY signal reception situation is unique unto itself with, at least, a  half dozen or more unique variables affecting performance. Therefore, it is ALWAYS  IMPOSSIBLE to predict results, let alone guarantee it, for RF propagation and reception consistently. One simply has to use good information, common sense and some experimentation to get the best results at his/her unique location with his/her specific setup and circumstances.

There are, however, general accepted guidelines to help one make an educated determination as to what  SHOULD work in a given location to possibly improve performance for each component in the chain. We try to  cover most of these in our descriptions which I urge you to READ CAREFULLY (TWICE!) BEFORE PURCHASING our  amplifier!

One of the best of these suggestions and one of the best ways to determine possible, expected reception performance for your particular location is to go to the TVFOOL.com website and enter your address into their search form. They will issue a chart for your specific location showing the available channels for your address arranged according to signal strength (with the strongest first in descending order to the weakest). It will also show you the available transmitted signal strength in dB, the distance of the transmitting station from your location and the exact compass coordinates for pointing your antenna among other useful information.

Assuming the PROPER passive antenna (such as our "TruTenna" design in our alternate listings), properly located and positioned, our amplifier  properly applied along with the other necessary peripherals (including good coax, connectors and an adequately sensitive receiver/tuner) ....THEN you can conclude with some certainty, assuming all conditions are accounted for, that you should be able to receive all of the channels they list in their chart in the green and yellow sections, as well as most of the pink, fairly consistently. The weakest ones listed at the very bottom of the pink section may only be available at night or sporadically and some few in the top of the weak, grey area may be available under the best of propagation/reception conditions but not consistently. This chart will not be 100% accurate (nothing is) but it is usually a very good "ballpark" indicator.

Again we emphasize that an amplifier is only ONE link in a signal chain and it all starts with a good, properly positioned, passive antenna. Where an amplifier is required or desired, and properly utilized and applied, our TRUTH amp has been proven time and again to be as good as it gets in terms of digital signal amplification. But, remember that NO amplifier can "invent", or help improve, signals that are not traveling down the coax to the amp input whether they are either just not there for detection by an antenna to begin with, or interfered with in some way by airborne or electrical disturbance, or not properly developed by an inadequate  antenna.


Of course, if you buy one of the "cheapo" amplifier units mentioned in the beginning, you may likely  make your  reception  MUCH WORSE  by INCREASING the system noise as many of the cheaper units have noise figures as high as 6 to 10  dB!  One  such unit we  tried during our research actually resulted in NO SIGNAL whatever, although the unit was  "functioning".



From what we read, we see a lot of people are telling you that there is NO DIFFERENCE in HDTV  transmissions  from regular  "old fashioned" transmissions and that devices labeled "HDTV" or "DTV" are usually just hype. Well,  this  may be  true to some  extent but not entirely. For example, of course there is definitely NO difference in the kind of antenna  employed for  one signal  type or another. Any antenna well designed to receive the old ANALOG transmissions will certainly  work just  as  well for digital  so long as it is optimized for today's lower UHF bandwidth (and many on the market are NOT).  But,  there  really IS a  difference in the signal itself and, while older analog type amplifiers might work to amplify digital  signals,  many  times, some of  these traditional designs can actually DEGRADE the existing digital signal thereby making reception  worse! 

The biggest noticeable difference in the digital signal envelope, as opposed to analog, is the way it is  modulated.  Old analog  transmissions utilized amplitude modulation for the video portion of the signal, which meant the picture  signal  was  encoded by  varying the peak strength of the carrier signal by small margins. On the other hand, the digital  encoding  process  allows the full,  peak amplitude of the prescribed frequency carrier wave to be maximized and maintained at all times.  Our  "TRUTH" amplifier  design takes into full consideration this new signal transmission medium, in the way it is processed  internally, so  that we  really can say, TRUTHFULLY, that the "TRUTH" amplifier is an ideal "digital" signal amplifier!



Remember this listing is for the MAST MOUNT "phantom power" package. The inside version of the "TRUTH" amplifier, with plug-in  power supply,  is  offered in another listing. See our other listing for the alternate offering.




THE TRUTH:

  • Guaranteed low noise figure of 1.4 dB 
  • Flat stable gain of 18dB (+/- 1 dB) 50 MHz to 1.2 GHz
  • Linearly amplifies complete RF spectrum VHF, FM, UHF, CATV (mid, super, hyper, ultra)
  • 75 ohms in/out
  • Input clamped for static/overload protection
  • On board power supply decoupling conditioning
  • Improves the noise figure/sensitivity of most current generation digital TV receivers
  • Outperforms some brand name "pro" units in the $150 to $250 range
  • Designed and built for a lifetime of reliable performance with proper use












  • WARRANTIES AND RETURN / REFUND POLICIES -
    Please read CAREFULLY and understand FULLY ... BEFORE you purchase!  -




    We know without doubt what our unit can do ...
    and that everything we say about the "TRUTH" amplifier ...
    IS THE TRUTH!

    Therefore we make the following guarantee:


    THE (NOT SO) FINE PRINT ...
    PLEASE READ CAREFULLY!

      Since these are handmade to auction one at a time and are time consuming to produce ...
    we MUST pass along some purchase responsibility to the buyer!


    We have sold hundreds of these since we began in 2009 ...
    and, with the exception of just ONE  known instance to date where an amp actually was defective...
    ALL the other user issues with the  amplifier have turned out to be some form of MISAPPLICATION!


    SO ...
    BEFORE YOU PURCHASE ...

  • PLEASE be sure that you need, and know how to correctly apply, a  precision UHF/VHF  signal amplifier!

  • Understand that NO RF amplifier can work miracles if there is no usable signal developed by the  antenna to begin with!

  • Further understand that amplifiers to not "create" channels, the signals must be available in your area  to begin with (one recent complainer actually believed otherwise!)!

  • Furthermore, do NOT, necessarily, expect this amplifier to outperform another amplifier that you now  own  which already offers both TRULY SIMILAR noise specs (few do!) combined with TRULY HIGHER gain  figures (some do).

  • Be certain that your antenna that you use with the TRUTH amplifier is, indeed, a PASSIVE  antenna and that any "amplifier" which you replace with ours is, indeed, actually an amplifier and not,  instead, a POWER SUPPLY for an active antenna (this has happened on several occasions!).

  • Do not expect the TRUTH amplifier (or ANY amplifier) to improve the performance of poor, or  gimmick,  antennas.

  • Every TRUTH amplifier is individually, professionally proofed (TWICE!) prior to shipment to certify  our advertised  specifications. Thus, we know that each one performs exactly as we say they do and so do hundreds  of satisfied buyers ...  this is, after all, the only way we could afford to offer them!


    In short, if the amp is not defective (DOA), then it should work in all situations where an amplifier  is applicable.

    In setups where the TRUTH amp would not improve the signal ... then, obviously, it  is NOT a situation that an amplifier can improve to begin with!
    That is why we emphasize that we  MUST pass this application responsibility on to the buyer! All subjective returns of working amps MUST be authorized and all are subject to a 10% return fee!

    Therefore, if you truly need an amplifier that will perform as ours is described and apply it properly ... 
    there should be no reason to be dissatisfied with your purchase except for the unlikely scenario  whereby  the amp  should arrive dead on arrival!

    .


    However ...

    In the HIGHLY unlikely event your amp would arrive damaged or defective ...
    we  would promptly  replace it at no cost to you (including your return shipping!).

    Furthermore, we now extend the  warranty to include any ELECTRONICS failure within NINETY DAYS!
    (Cosmetics/hardware not  included nor is electronics damage by misapplication, power surges or lightning)

    Any failure outside the warranty or subsequent to ninety days would be repaired for just a minimal  bench charge and return shipping fee. 



    In addition to replacing a defective item at no cost (which is so rare we have had ONE to date!) ...
    If you are not satisfied with your purchase for any reason, or having application problems ...
    PLEASE, EMAIL US FIRST at the email address provided in the included applications notes
    and  we will correspond with you personally to try and determine the problem...
    and walk you  through  basic troubleshooting.






  • IMPORTANT DISCLAIMER:
    By purchasing this device you signify your own full  responsibility for it's application or misapplication.
    The supplier is NOT, and CAN NOT, in any way, be responsible, or  liable, for any damages
    to  person or property that might occur while this device is in use!


    Please be advised that a LOT of time is invested into  fabricating  and testing each one  of  these units so we honestly cannot guarantee how long we can offer them at this price with ever rising costs. O.T. Hudson can only fabricate and offer just a few of these per month, so we offer them as available.

    If you order here from our website, we have a unit for you tested and ready to ship NOW!

    Remember, too, that you will also receive printed application notes and tips
    for helping  you  optimize your own  reception  setup! Please read these CAREFULLY BEFORE installation/application!



    PLEASE NOTE THAT, AS OF 2016, MINT TINS ARE NO LONGER SANDED!
    THE ORIGINAL COATING IS LEFT TO HELP DETER OXIDATION AND CORROSION.

    The mast mount version is offered here EXCLUSIVELY for just $84.50. You may order securely through PayPal. You may use your credit card and do NOT have to be a PayPal member to order!


    HERE IS HOW TO ORDER NOW - SIMPLY CLICK THE PAYPAL "BUY NOW" BUTTON BELOW!








    PRICE INCLUDES  PRIORITY MAIL SHIPPING IN THE USA !

    I USE FLAT RATE PRIORITY MAIL EXCLUSIVELY FOR MANY VALID REASONS ...

  • IT COSTS ONLY A LITTLE MORE THAN THE OTHER MAIL CLASSES 
  • IT RECEIVES TRUE PRIORITY CARE AND HANDLING IN ALL ASPECTS BY USPS 
  • DELIVERY IS FASTEST POSSIBLE AIRMAIL - 2 TO 3 DAYS ANYWHERE USA 
  • IT UTILIZES POSTAL SERVICE APPROVED, AND SUPPLIED, SHIPPING MATERIALS 
  • PRICE INCLUDES GUARANTEED SAFE, CONFIRMED, DELIVERY WITH TRACKING
  • INTERNATIONAL SHIPPING ADDITIONAL BY CALCULATION


    IF THIS AMPLIFIER WON'T IMPROVE YOUR VHF/UHF DIGITAL TV SIGNAL RECEPTION ... 
    THEN NO AMPLIFIER WILL!

    The simple "TRUTH"

    Complete concept, text, descriptions and photos copyright 2009-2022  by LH Davis. All rights  reserved and enforced!